PRODUCTS
SERVICE BLOCK
ПРОДУКЦИЯ
СЕРВИСНЫЙ БЛОК





PRODUCTS


2NF

Minimum block size from 2NF Keramkomfort Line is an equivalent of 2.12 regular brick. With 2NF blocks, you will be able to erect walls in half the time, saving the masonry mortar.


2nf.jpg
2nf.jpg
kf-25.jpg
kf-38.jpg
Order

KERAMKOMFORT 25 P+G (10.5NF) BRICK

Size: 250 h 380 h 215 mm evivalent 10,5NF, the coefficient of thermal conductivity 0,15-0,16 W / mK, weight 14,9-15,5 kgfrost resistance (F) greater than over 50 cycles.


Технические характеристики

Размер: эквивалент 10,5 шт. условного кирпича
Размер: Ш х Д х В (мм) 250 x 380 x 215
Масса изделия (кг) 16
Средняя плотность (кг/м3) 750 - 800
Предел прочности при сжатии (кг/см2) 75 - 125
Морозостойкость (циклов) не менее 50
Водопоглощение (%) 12 - 18
Теплопроводность (Вт/м2°С) 0,16 - 0,19
Количество на поддоне (шт.) 60
Количество блоков на 1 м3 (шт.) 49
Цена за 1 шт. (грн.) 30,45
Order

KERAMKOMFORT 38 P+G (10NF) BLOCK

Size: 380h245h215 mm evivalent 10nF, the coefficient of thermal conductivity 0,15-0,16 W / mK, weight 12,6-13,2 kgfrost resistance (F) greater than 50 cycles.


Технические характеристики

Размер: эквивалент 10,5 шт. условного кирпича
Размер: Ш х Д х В (мм) 380 x 240 x 215
Масса изделия (кг) 15.6
Средняя плотность (кг/м3) 800
Предел прочности при сжатии (кг/см2) 100
Морозостойкость (циклов) не менее 50
Водопоглощение (%) 17
Теплопроводность (Вт/м2°С) 0,2
Количество на поддоне (шт.) 60
Количество блоков на 1 м3 (шт.) 51
Цена за 1 шт. (грн.) 29
Order


KERAMKOMFORTTM Porous Ceramic Blocks by SBK are most advanced construction material which brings together brick house building traditions and best practice of energy-efficient construction.

Distinctive properties of porous ceramic blocks include improved heat transmission, sound insulation, high strength and a large size, which make this material stand out among other construction materials.

Ceramic blocks by SBK are used to erect load-bearing walls of the buildings up to 24 meters high with a height of one floor not exceeding 4 m:

  • residential buildings;
  • municipal buildings;
  • commercial real estate;
  • industrial buildings.


On top of that, ceramic blocks by SBK are perfect for arranging enclosure structures in monolithic and framed construction. It is acceptable to use these blocks when erecting walls of the premises with damp environment, provided that vapor seal covering is applied to inner and outer sides of the blocks.

Blocks may not be used for walls of the premises with wet environment, as well as for external basement walls.